
WINGFOIL ALL IN ONE PACK
This complete pack includes:
- JP-AUSTRALIA WING AIR 2022 5ˈ 4ˈˈ or 6ˈ 0ˈˈ
- CABRINHA CROSSWING X3 2022 5m²
- NEILPRYDE GLIDE SURF HP 2022 75cm / 1850 cm²
- CABRINHA PUMP
- CABRINHA SAFETY WRIST LEASH
- ION LEASH COILRD ANKLE
- NEILPRYDE FOIL ADAPTER 2022
JP-AUSTRALIA WING AIR 2022
PURE WING FOILING
Our pure wing foil inflatable. The compact hull and JP’s superior construction provide a stiff feel when flying on the foil. It is super user friendly because it provides all advantages of inflatables: comfortable and smooth on your skin and knees, light and small for easy transport and storage. More on inflatables? See below...
There is no better JP board when it comes to pleasurable, enjoyable and hassle-free winging in light winds. Pure wing foiling fun!
Top recommendation: The NeilPryde Glide foil fits perfectly and is our first choice – the Glide Wind for beginners and/or heavy weights (for its ease, control and steady lift), the Glide Surf for light and/or advanced riders (for its agility and life).
The two sizes from last year (5’4”x27.5” and 6’0”x28.5”) are now partnered with a smaller 5’0”x27.5”. All boards feature footstrap positions for wing-foiling and foiling.
Inflatables have clear advantages over hardboards: They are super comfortable and user friendly as they are easy to transport and store. These JP inflatable wing foil boards are specially developed and equipped for early take-off, featuring hard rails, Triple Layer Composite Drop Stitch and more. Additionally, they come in JP’s superior welded technology.
Welded Technology: This heat-welded connection was introduced last year and proved to be successful. It creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer.
Hard Rails: In the tail, the specially developed, super clean hard rails are covered by a fibre reinforced layer of PVC cloth and create a smooth and efficient water release. Thus, the board picks up speed to take-off easily. Touchdowns are smooth and comfortable.
Triple Layer: They come with Pre-Laminated Triple Layer Composite Drop Stitch, Fibre Reinforced Stringers in deck and bottom and Welded Rails and will surprise you with their stiffness.
Track Foil Plate: The board features a Track Foil Plate of the same size as on our hard boards providing a big range of foil placement. The G10 material adds additional longitudinal stiffness to the hull. On the other hand, this plate is not too long – thus you don’t need an oversized bag but it can still be folded easily into a normal size SUP backpack.
Footstraps: The boards come with three easy-to-mount footstraps for wing foiling.
Comfort: The soft hull is covered with a large, slip-proof EVA sheet for unmatched comfort and a safe stance. You also don’t have to worry about mistakes anymore because you won’t get hurt when falling on it.
Transport and Storage: Rolled up, the boards fit into a backpack – no more need for a car with roof rack for transport or a big garage for storage. In times when airlines are hesitant to accept windsurf equipment, the boards’ backpack dimensions are a major advantage!
ADDITIONALLY INCLUDED ACCESSORIES
- 3 straps
- Pump
- Repair set
- User manual
- Backpack
Reduced foil track depth [13mm]. Make sure to use the right screw length for your plate mount system!
MAX screw length = 13mm + Plate Thickness
All JP foil boards come without screws to attach the foil.
Note: This inflatable JP board features a special G10-track-plate requiring shorter screws, than all our JP composite boards.
For example:
The screws supplied with NP foils fit all JP composite boards. But these screws are too long for this inflatable!
Therefore, NeilPryde now also offers a set of four M8x20 screws (titan, torx key head) in their spare parts range.
-> check with your local dealer.
KEY FEATURES:
- Triple Layer Composite Drop Stitch
- Deck and bottom PVC reinforcement
- Smooth and comfortable touchdowns
- Level of performance comparable to a composite board
- Foil use only
SPECIFICATIONS:
CODE
|
5'4" x 27.5"
|
6'0" x 28.5"
|
Length(cm)
|
165
|
183
|
Width(cm)
|
70
|
72
|
Volume (l)
|
110
|
130
|
Weight(kg)
|
7,7 +/- 10%
|
8,4 +/- 10%
|
Thickness(cm)
|
13
|
13
|
Fin
|
no fin
|
no fin
|
Fin box
|
2x Long tracks in a G10 plate
|
2x Long tracks in a G10 plate
|
CABRINHA CROSSWING X3
WING SURF / FREERIDE
SIZE: 5M
Already into its 3rd iteration, the Crosswing X3 sets a new standard in efficiency and on-demand power.
Detailed work has been done by Cabrinha's R&D team into the wing profile and new radial canopy panel layout to achieve our most high-performing and reactive wing to date.
Through an increased leading edge diameter with load distributing centre section construction, we have created an exceptionally stiff framework, which is further enhanced by the X3's innovative double strut. This framework gives the rider the ultimate feeling in efficiency and performance both in the lighter winds, where pumping and efficiency is required, and also in higher winds where stability and control are greatly increased.
Strategic window placements with the combination of the double strut, allow for a wide field of view.
Whether you are boosting to new heights or simply relaxing into your ride, take advantage of all of the X3's new cutting edge technical attributes.
DESIGN PROFILE
Leading edge inflatable dihedral with powerful profile and "ultra rigid double strut"
FEATURES
- NEW: Ergonomic widespan handle layout for micro adjustment/trim
- NEW: Increased LE diameter with load distributing centre section for improved stiffness & canopy tension
- NEW: improved low end
- NEW: HD large diameter closing seam construction
- NEW: Improved balance, linear power delivery and upwind drive
- NEW: Ultra rigid flared Double Strut for aerofoil support and improved response
- NEW: Radial canopy layout for improved response and stiffness
- High tenacity dacron LE
- Sprint inflate valve
- Nano tech ripstop
- Safety wrist leash included
- Kevlar wing tip reinforcement
- Harness line attachment points
KEY FEATURES
- RADIAL PANEL LAYOUT: The new radial panel layout creates a tighter overall canopy and firmer structure, created by the load distributing seams.
- INCREASED DIAMETER LE: the Increased diameter Leading Edge creates a more rigid and stiff framework. Special attention has been paid to the centre where the load is distributed evenly.
- EFFICIENCY: An incredibly efficient performing wing allowing you to ride in a lower wind speed and increasing the drive of the wing when pointing into wind.
- RESPONSE: The ergonomic handle layout has been refined to deliver the optimal handle placement for micro adjustment/trim while controlling the wing.
- DOUBLE STRUT: The new flared double strut creates a more rigid support to the canopy while stiffening up the ’spine’ of the wing. This helps to support the airfoil and improve rigidity.
- 20/20 VISION: The double strut allows for increased visibility through the strut area, which opens up the entire center area.
STYLE SELECTOR

WIND CHART (KNOTS):
2m
|
2.5m
|
3m
|
3.5m
|
4m
|
4.5m
|
5m
|
6m
|
7m
|
25-45
|
20-40
|
17-36
|
16-34
|
15-30
|
13-27
|
11-26
|
7-20
|
6-18
|
GLIDE SURF HP
GLIDE SURF creates a playground for building new surfing sensations. With a stable and fast take off no matter the surf conditions, the GLIDE SURF delivers superior gliding and controlled speed to ride waves as far as they can flow. On the wave, the Glide Surf allows you to fly through the sections and progress from straight riding to progressive foil-turns. Your imagination is now the only limitation to how you will use the waves and how far you will fly.
Pump from one wave to the next - see how long you can fly!
Connection base sold separately - Please choose a base depending on your sport and board of choice:
KEY FEATURES:
BASE SYSTEM: New CNC reinforced base construction. Two deep titanium vertical tube connections to the mast for maximum strength, eliminating movement and offering perfect load transfer. Avoids vibration around the upper attachment area. Choose your base system depending you your sport.
CONSTRUCTION: All foils are supplied with a T-40 torx drive, and come with titanium plated stainless steel bolts for maximum strength to weight ratio, preventing any corrosion problems.
SURF FUSELAGE: Perfectly blended wing to CNC machined fuselage connection and integrated wind saddle providing minimum drag. Volume and weight of the aluminum used in the fuselage is reduced by eliminating the forward protruding nose.
MAST: 75cm aluminum mast. Optimized structure with two CNC female base system inserts ensuring maximum strength. Hollow construction to reduce weight combined with x3 vertical cross-ribs for maximum stiffness. Sanded mast trailing edge to avoid planning turbulence noise. Tempered, salt water corrosion resistant 6061-T6 aluminum.
WINGS: GLIDE wings are made of pre-preg carbon layup with inner foam construction for maximum durability to weight ratio. This setup creates a natural tendency to roll into turns maintaining a nice balance during your ride. The front wing is designed with a pronounced rounded “angle of attack” and an elliptical bend shape. While flying, this thick leading edge on the front wing naturally closes the radius of your turn, tightening it. Far back, the angled down tail wings maintain a self- stabilizing roll allowing an easy turning performance. During this momentum, the GLIDE tail wing will always come back to a flat position, stabilizing the turn.
MODULAR SYSTEM: GLIDE HP is a fully modular system so you can expand your foil setup by simply adding new wings. Glide HP now offers a range of front wings from 1100cc all the way to 2300cc to cater for every level and size of foiler. Glide Wind comes with a longer fuselage and 80cm mast for windsurf foiling and Glide Surf comes with a shorter, more maneuverable fuselage and a shorter, 70cm mast to be able to access shallower breaks.
